Harbin Hytera Technology Co.,Ltd.
Intelligent Robotics

For security teams, the most important features are reliable group calling, emergency alarm, man-down detection, lone-worker protection,...

Scroll for more
About Us
Harbin Hytera Technology Co.,Ltd.
Company profile
Robotics and intelligent systems
About the Company
Company introduction
For security teams, the most important features are reliable group calling, emergency alarm, man-down detection, lone-worker protection, GPS location, priority calls, and remote monitoring. These functions help supervisors respond quickly when personnel face safety risks or require assistance. For logistics and fleet operations, prioritize wide-area coverage, dispatch, GPS tracking, text messaging, status alerts, and integration with fleet-management systems. Radios should also support clear communication between drivers, warehouse teams, yard staff, and control-room operators. In both scenarios, battery life, ruggedness, audio clarity, ease of use with gloves, and centralized device management are essential. The best solution should improve response time, operational visibility, and workforce safety rather than simply provide basic voice communication. Under the UK Waste Batteries and Accumulators Regulations 2009 and EU Battery Regulation (EU) 2023/1542, Hytera Communications acts as a registered producer of industrial Lithium-Ion batteries and provides a free-of-charge take-back, treatment, and recycling service for end users and business customers. UK Customers: To arrange the return and compliant recycling of waste Hytera industrial batteries, please contact our UK team at +44 (0)1753 826120 or info@hyterauk.co.uk. EU Member States: Customers across continental Europe can coordinate battery take-back through their local Hytera authorized distributor or regional service centre in compliance with national WEEE and battery recycling schemes.Read more about our environmental commitments on our Sustainability page. Hytera portable radios commonly use rechargeable lithium-ion battery packs. Depending on the model and application, options may include standard-capacity, high-capacity, and intrinsically safe battery packs for hazardous environments. Lithium-ion batteries offer a strong balance of energy density, weight, and rechargeability. Their usable life is affected by charging habits, depth of discharge, temperature, storage conditions, and the number of charge cycles. As a practical guideline, replace batteries when runtime falls noticeably below operational requirements or when the battery shows physical damage, swelling, overheating, or charging abnormalities. Use only manufacturer-approved batteries and chargers, particularly for intrinsically safe radios. DMR uses TDMA technology, which divides a channel into two time slots. When a DMR radio transmits voice, it transmits during one 30-millisecond time slot and remains idle during the other 30-millisecond time slot. This creates a 50% transmit duty cycle, reducing the radio’s active transmission time and lowering power consumption. As a result, DMR portable radios can achieve longer operating time from the same battery capacity compared with analog radios. Actual battery life still depends on the radio model, battery capacity, transmit time, GPS use, display brightness, Bluetooth use, temperature, and network configuration. For accurate planning, assess battery performance under your real shift patterns and operating conditions. The communication range of a portable two-way radio is not a fixed distance. It depends on transmit power, antenna type and height, terrain, buildings, weather, interference, and the presence of a repeater. In open, line-of-sight conditions, portable radios may communicate over several kilometres. In urban areas, factories, warehouses, or buildings with metal structures, the effective range can be significantly shorter because walls, machinery, and other obstacles weaken the signal. For reliable business coverage, do not rely only on the maximum range stated in a product specification. Use a site survey to identify dead zones and determine whether repeaters, distributed antenna systems, or IP-connected sites are required. Products Two-way Radio Solutions DMR Two-way Radios DMR Repeaters & Systems TETRA Two-way Radios TETRA Systems Analogue Two-way Radios ATEX Radios Licence-free Radios S Series Radios MCS & PoC Radio & System PoC Radios MCS Devices Dual-mode Rugged Radios HyTalk Multimedia Communication Platform Body Camera & System Body Camera Docking Station Digital Evidence Management Fast Deployment Solutions E-pack100 TETRA E-pack200 E-pole200 E-Center Coverage Extension Solutions DS-9300 TS-9200 Applications Unified Communications & Dispatch Device Management Accessories Antenna Audio Battery Cable Car-kit Charger Carrying Case Others Discontinued Products Discontinued Products Find A Product Find Accessories Consumer walkie-talkies are designed for occasional, short-range communication. Commercial two-way radios are purpose-built for business-critical operations such as manufacturing, construction, security, logistics, and multi-site enterprises, where reliability, durability, coverage, group management, and system scalability are essential.How to decide: If communication failure could affect safety, production, security, or customer service, choose a commercial two-way radio system rather than a consumer walkie-talkie. Hytera provides professional two-way radio solutions designed for reliable, private push-to-talk communications in demanding business environments. Hytera two-way radio solutions Immediately turn the radio off and remove the battery. Do not attempt to charge it, press buttons repeatedly, or power it on again, because this can cause further damage to the internal electronics. Dry the exterior with a clean, absorbent cloth and remove any visible water from the battery compartment, accessories, and connectors. Leave the radio to dry naturally in a ventilated area; do not use a microwave, oven, hair dryer, or direct heat source. Even if the radio has an IP67 rating, water ingress may still occur if seals, antenna connections, battery contacts, or accessories are damaged. Send the radio to an authorised service centre for inspection before returning it to service. Yes. Like all wireless communication devices, two-way radios emit radiofrequency (RF) electromagnetic energy when transmitting. All Hytera terminals sold in Europe are rigorously tested and certified to comply with ICNIRP exposure guidelines, EU Directive 2013/35/EU, and applicable SAR (Specific Absorption Rate) limits. To ensure safe operation: Hold portable radios vertically at least 2.5 cm (1 inch) away from your face/mouth when speaking. Use a genuine Hytera remote speaker microphone or earpiece when wearing the radio on your belt or body. Never transmit without an antenna attached or if the antenna is physically damaged.Learn more on our Accreditations & Compliance page. When reception is clear but outgoing transmission breaks up, the issue is usually isolated to the transmit power path or microphone: Low battery voltage: Transmitting consumes significantly more current than receiving; a weak battery may sustain reception but drop voltage during transmission. Obstructed or damaged microphone: Check that the microphone pinhole on the front housing is not blocked by dust, debris, or moisture, and test whether the issue persists without an external speaker microphone attached. Incorrect TX power setting: Verify in CPS that the channel is not inadvertently locked to Low Power mode in a high-attenuation environment. Intermittent audio accompanied by static or heavy noise typically indicates weak signal reception or channel interference: Out of communication range: Move closer to the transmitting radio or repeater, or step away from dense concrete/metal structures. Loose or damaged antenna: Ensure the antenna is screwed firmly onto the RF connector and inspect it for cracks. Analog squelch / frequency mismatch: In analog mode, verify that the squelch level is properly configured in CPS and that both radios share the exact same frequency and CTCSS/CDCSS signaling codes. Interference and background noise can occur near high-power electrical equipment, industrial machinery, lighting systems, vehicle engines, or other radio transmitters. Physical obstructions such as metal walls, underground areas, and dense building structures can also weaken the signal. Identify whether the issue occurs in one location, across a site, or only on certain channels. If it is location-specific, conduct a coverage and interference survey. If it affects multiple channels, review frequency planning, antenna installation, and nearby RF sources. If the radio operates normally through its built-in speaker but produces no sound via an earpiece: Check the accessory connector: Ensure the multi-pin or 2-pin plug is pushed all the way in and the securing screw is tightened. Inspect for debris: Clean any lint or dust inside the radio’s accessory jack. Verify accessory compatibility: Confirm you are using a genuine Hytera earpiece designed for your exact radio series (e.g., HP Series vs. PD Series connectors differ). If the issue persists, test with a second earpiece to rule out a broken cable. Hytera Europe provides technical support, repair services, spare parts, software support, and after-sales assistance through its European service desk. Customers can submit requests for device faults, warranty enquiries, software issues, and product service support. For sales, marketing, and product enquiries, Hytera Europe provides regional contact channels for customers across Europe and the UK. When contacting support, provide the radio model, serial number, purchase details, firmware version, and a clear description of the issue.
Official Website
Products & Solutions
Explore our products
Products & capabilities
Explore company products
Company Channels
Explore more
Start a Conversation

Have a project in mind?

Contact Harbin Hytera Technology Co.,Ltd. to discuss your requirements.

Harbin Hytera Technology Co.,Ltd.
Official website

Harbin Hytera Technology Co.,Ltd.